

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

GMC Vehicle Sierra 2500 HD
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Power Steering Fluid Check
The power steering fluid reservoir is in the engine compartment on the driver side of the vehicle.
When to Check Power Steering Fluid
It is not necessary to regularly check power steering fluid unless there is a leak suspected in the system or an unusual noise is heard. A fluid loss in this system could indicate a problem.
Have the system inspected and repaired.
Wait for the power steering system to cool, with the engine off, before checking the fluid.
How to Check Power Steering Fluid
To check the power steering fluid:
1. Set the ignition off and let the engine compartment cool down.
2. Wipe the cap and the top of the reservoir clean.
Taillamps Replacement
Step 1: Open the tailgate.
Step 2: Remove the two rear lamp assembly screws.
Step 3: Pull the rear lamp assembly outward and rearward away from the box side to remove it from the vehicle.
Step 4: Turn the bulb socket counterclockwise.
Step 5: Pull the bulb straight out from the socket.
Step 6: Replace the bulb.
Step 7: Reverse Steps 1–5 to reinstall.
Was the taillamp successfully replaced?
Sign off on the taillamp replacement
Wiper Blade Replacement
Caution
Allowing the wiper arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by the vehicle warranty. Do not allow the wiper arm to touch the windshield.
Windshield wiper blades should be replaced periodically.
Replacement blades come in different types and are removed in different ways. For proper type and length, see your dealer.
Front Wiper Blade Replacement
To replace the wiper blade:
1. Pull the wiper assembly away from the windshield.
2. Lift up on the latch in the middle of the wiper blade where the wiper arm attaches.
3. With the latch open, pull the wiper blade down toward the windshield far enough to release it from the J-hooked end of the wiper arm.
24 Monthly / 36 000 km / 22,500 mi Passenger Compartment Air Filter
Warning: This procedure requires trained personnel!
Is the passenger compartment air filter in good condition?
Select the driving conditions
Is there reduced airflow?
Is there window fogging?
Are there any odors?
Enter the current mileage of the vehicle
Enter the date of the last filter replacement
Sign off on the filter check
Engine Air Filter Replacement
Warning: Do not start the engine or have the engine running with the engine air cleaner/filter housing open.
Caution: If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it. Always have the air cleaner/filter in place when driving.
Engine air filter’s remaining life acceptable?
If the Driver Information Center (DIC) displays a message to replace the engine air filter at the next oil change, follow this timing.
If the DIC displays a message to replace the engine air filter soon, replace the engine air filter at the earliest convenience.
If the DIC displays a message to check the engine air filter system, see your dealer.
Before removing the engine air cleaner/filter, make sure that the engine air cleaner/filter housing and nearby components are free of dirt and debris.
Engine air cleaner/filter housing and nearby components free of dirt and debris?
Do not clean the engine air cleaner/filter or components with water or compressed air.
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













