Epson Multimedia Projector EB L1710S

Air filter replacement period: If the message is displayed frequently even though the air filter has been cleaned, replace the air filter.

How to replace the air filter: The air filter can be replaced even when the projector is suspended from a ceiling.

Turn off the projector's power and the confirmation buzzer beeps, disconnect the power cord.

Remove the air filter cover. Grip the air filter cover tab between your fingers, and pull up and remove the cover while pressing the tab.

Remove the air filter. Grip the tab of the air filter, and pull it straight out.

Install the new air filter. Press until it clicks into place.

Sign off on the air filter replacement

- Caution: When cleaning, unplug the power cable from the electric outlet. Otherwise, it could cause an electric shock.

1. Cleaning the Projector's Surface

Clean the projector's surface by wiping it gently with a soft cloth.

If the projector is particularly dirty, moisten the cloth with water containinga small amount of neutral detergent, and then firmly wring the cloth dry before using it to wipe the projector's surface.

Do not use volatile substances such as wax, alcohol, or thinner to clean the projector's surface. The quality of the case may change or become discolored.

Use a commercially available cloth for cleaning glasses to gently wipe the lens.