Crescor Hot Cabinet H138NPS36CLCMQRL i7

Loosen two screws located in magnetic strike on cabinet.

Move strike up or down for alignment to magnet on latch.

Loosen four screws in latch on door.

Move latch forward or backward to adjust magnetic draw.

Test the door for proper alignment and magnetic draw.

Unplug the cabinet from the wall

Avoid using the following during cleaning

Wipe up spills as soon as possible

Clean cabinet daily to avoid heavy dirt build-up

Lay the door down with the outside up

Pop off hinge covers with a screwdriver

Loosen the screws that hold hinges to the door

Test door closure with paper on latch side

Test door closure with paper on hinge side

Does the paper pull out without resistance on latch side?

Does the paper pull out without resistance on hinge side?

Apply non-permanent liquid thread lock to loose screws

Unplug the cabinet from the wall

Do NOT use abrasives (steel wool) or harsh chemicals (chlorine, bromine, iodine or ammonia)

Do NOT use a water sprayer (pressure sprayer) to clean the cabinet

Wipe up spills as soon as possible

Clean cabinet daily to avoid heavy dirt build-up