CAT Forklift GC40K-STR

Check Damaged or faulty operation found the day before

Check Oil, fuel or coolant leaks

Check Tilt cylinder socket bolts

Powershift Transmission Change Oil and Wash Strainer

Hydraulic System Change Return Oil Filter and Wash Strainer

Hydraulic tank return oil filter

– Bolts and nuts of overhead guard should be retightened.;

Park the lift truck on a level surface, parking brake applied, transmission in NEUTRAL and the engine stopped.

1. Raise the lift bracket high enough to gain access to the level/fill plug.

2. Use blocking under the inner mast to secure the lift bracket in this position.

3. Remove the level/fill plug. Maintain lubricant level to the bottom of the level/fill hole.

4. Clean the level/fill plug and put it back in place.

5. Remove the blocking. Lower the lift bracket.

Powershift transmission Check Oil Level

WARNING: Hot oil and components could cause serious injury. Do not allow hot oil or components to contact your skin.

NOTICE: When changing fluid consult with your Cat lift truck dealer.

Parts to be Changed Periodically

Parts to be changed every 2400 service hours or 1 year

Parts to be changed every 2400 to 4800 service hours or 1 to 2 years

Parts to be changed every 4800 service hours or 2 years