Bunn Brewer SURE IMMERSION 312

Remove and wash the drip tray and drip tray cover in a mild detergent solution. Rinse thoroughly

Wipe the lower front panel, door, and cabinet with a clean damp cloth

Selecting the RINSE tab from the CARE AND CLEANING screen will prepare the equipment for rinsing the Brew Funnel and Brew Box

Follow the directions shown on the screen

Once the START button has been pressed, the CARE AND CLEANING screen will show a progress bar - with the message 'Please Wait - Rinsing'

If for any reason the rinsing process needs to be halted, press the Stop button

Warning: Ensure the machine is turned off and unplugged before starting the cleaning process.

Is the brew funnel in the upper position?

Did you disconnect the rubber hose from the brew funnel?

Did you press down on both flat springs under the funnel arms?

Did you pull the funnel down and forward to release it from the funnel arms?

Did you clean the funnel using any mild, non-abrasive, liquid detergent?

Did you rinse and dry the funnel?

Did you reinstall the funnel by tipping the top edge of the funnel under the coffee chute?

Did you place the metal pins on the flat springs?

Remove the powder mixing chambers, steam traps, frothers and mixing chamber bases

Remove the dispense hoses from the dispense nozzle assembly

Clean all parts removed in warm soapy water. Use the provided cleaning brush (PN 26367.0000) to clean bores and orifices. Rinse in cold water

Prepare one-gallon (3.8 liter) of sanitizing solution with at least 100 ppm of available chlorine in 120°F (48.9°C) water. Soak all cleaned parts in sanitizing solution for 5 minutes, then allow to air dry

Rinse cleaning brush, dip in sanitizing solution, and brush the bore of dispense nozzles

NOTE: Repeat this procedure for each nozzle separately

When reassembling parts, be sure to align arrow on frother disk with flat on whipper motor shaft, and rotate tab on whipper base clock wise to the vertical position to lock mixing chamber

Close the front door to resume normal operation

Selecting the CLEAN tab from the CARE AND CLEANING screen

Press the START button to begin

Follow the directions shown on the screen

CARE AND CLEANING screen indicates to the user to 'Please do NOT open door until prompted'

Press CONTINUE to move to the next step

The machine begins rinsing any loose grounds from the Brew Funnel

Warning: Use only the cleaning tablets provided with this unit. (PN 42933.0001)

Cleaning Tablet inserted into Brew Funnel

Note: The cleaning process can take up to 5 minutes to complete. If for any reason the cleaning process needs to be halted, press the STOP button

Cleaning cycle completed without pressing STOP button

Machine reset and returned to the beginning CLEAN screen

Progress bar provided and notice regarding the next cleaning procedure (Touch Panel Cleaning) received