Branson Ultrasonics Ultrasonic Bath CPX8800H-E

Prepare a fresh solution with general purpose household cleaning solution (concentration 1%) and warm tap water 49° C – 60° C (120° F – 140° F).

Fill the tank to within 3/8 inch (1 cm) of the 'operating level' line.

Turn the ultrasonics on for at least five to ten minutes to allow for degassing.

Wet the frosted portion of the glass slide with tap water.

With the No. 2 pencil, make an 'X' from corner to corner on the frosted portion.

Immerse the frosted end of the slide into the solution, holding it vertically and centered.

Check the tank for contamination whenever you change solution.

Remove contaminants with a nonabrasive cloth and water, if necessary.

Unplug the unit before emptying the tank.

Empty the solution into a waste disposal unit.

Unplug the line cord before filling the tank.

Fill the tank to the operating level using warm tap water.