Boss Snowplow Liquid Ice Control 305 LP

- The machine is equipped with stainless steel tank bands. It is important to frequently check the bands to ensure the straps are remaining tight. If a band can move freely by hand it should be tightened using the side and top adjustment bolts. Ensure to not over-tighten as tank damage may occur.

- Wash the machine after each use using water alone or with a mild detergent. You may use a rag when washing the machine.

- 1. Clean the area around the oil-filter cap.; - 2. Remove the oil-filter cap by rotating it counterclockwise.; - 3. Check the oil level.; The engine is full of oil when the oil level is at the bottom edge of the oil-fill port.; - 4. Install the oil-filter cap and wipe up any spilled oil.

- 1. Remove the wing nut securing the air-cleaner cover to the air cleaner, and remove the cover.; - 2. Clean the air-cleaner cover thoroughly.; - 3. Check the foam air-filter element for dirt and debris. Clean the foam air-filter if needed.; - 4. Assemble the air-cleaner cover to the air cleaner with the wing nut.

- Check the engine-oil level.; - Check the air cleaner.; - Inspect the tank straps for proper attachment.; - Wash the machine after each use.;

- Charge the battery.; - Inspect the tank straps for proper attachment.;

- Inspect all hoses and connections for damage and proper attachment.

- Examine each hose in the spray system for cracks, leaks, or other damage. At the same time, inspect the connections and fittings for similar damage. Replace any hoses and fittings if damaged.;

- Change the engine oil.; - Check/adjust the spark plug.; - Clean the sediment cup.