Boss Snowplow Liquid Ice Control 2022

- Service the in-line filter screen

- Clean the salt hopper and batch tank (or sooner as needed)

- 1. Clean the area around the in-line filter cap.; - 2. Remove the in-line filter cap and check the screen for any clogs or debris.; - 3. If the screen is clogged, clean the screen.; - 4. Inspect the gasket. Replace if it is worn or has cracks.; - 5. Reinstall the screen and in-line filter cap.

- 1. Unplug the machine from the electrical outlet.; - 2. Clean the area inside the salt hopper of any debris or rocks.

- 1. Unplug the machine from the electrical outlet.; - 2. Clean the salt hopper.; - 3. Open the side door to gain access to the tank.; - 4. Clean the inside of the tank and remove any debris or rocks.; - 5. Reinstall the side door and ensure the gasket is seated properly to prevent leaking.;

- Ensure the electrical connections are secure and safe;

- Inspect all hoses and connections for damage and proper attachment

- Examine each hose in the machine for cracks, leaks, or other damage. At the same time, inspect the connections and fittings for similar damage. Replace any hoses and fittings if damaged.;