Bobcat Loader T66 T4

Check condition of Accessory Drive Belt (Alternator, air conditioning, water pump). Replace as needed

Check the function of the lift arm bypass control in Bobcat Interlock Control System (BICS)

Check cables of Battery and connections

Check condition of Accessory Drive Belt (Alternator, air conditioning, water pump). Replace as needed

Check the function of the lift arm bypass control in Bobcat Interlock Control System (BICS)

Check cables of Battery and connections

Sign off on the loader maintenance

NOTE: The following steps are done before starting the loader.

Check level of Engine Oil and add as needed

Check for loose connections and damaged components of Engine Air Intake Ducting

Clean Engine Cooling System. Clean debris from radiator cooling package, air conditioning condenser (if equipped), rear grilles, and engine compartment

Check coolant level COLD and add premixed coolant as needed

Sign off on the 10 Hours Engine Maintenance

Warning: This check should be performed every 10 hours or daily for the first 30 hours, then as scheduled.

Enter the torque value after tightening

Lubricate with multipurpose lithium based grease

Check the condition of seat belt

Clean or replace seat belt retractors as needed

Check the seat bar and control interlocks for correct operation

Clean dirt and debris from moving parts

Check for correct function of Bobcat Interlock Control System (BICS)

Lift and Tilt functions MUST NOT operate with seat bar raised

Check for damaged tires and correct air pressure. Inflate to MAXIMUM pressure shown on the sidewall of the tire