Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more
Bobcat Loader T300
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
50 Hours Loader Maintenance
Check hydraulic fluid level and add if required
Check for damage and for leaks hoses and tubelines. Repair or replace as needed
Check fluid level of Final Drive Transmission (Chaincase, Wheel Machines Only) and add if required
Check for correct operation of Hydraulic & Steering Controls (Pedals, Hand, And/ Or Joystick). Adjust as needed
Check for loose nuts and tighten as needed Wheel Nuts / Track Drive Sprockets
Check tension and adjust as needed Track Tension (Track Machines Only)
Sign off on the 50 Hours Loader Maintenance
100 Hours Loader Maintenance
Empty spark chamber. (If equipped Spark Arrestor Muffler.)
Check battery for damage, hold down clamps, cables, connections and electrolyte level. Add distilled water as needed
Lubricate drive line Engine-to-Pump Coupler with multipurpose lithium based grease. (If equipped.)
Sign off on the loader maintenance
10 Hours Engine Maintenance
NOTE: The following steps are to be performed before starting the loader.
Check level of engine oil
Engine oil level is adequate?
If not, add as needed. Do not overfill. Change oil and filter after first 50 Hrs.
Engine air filter indicator and/ or display in good condition?
Service only when required. Do not use compressed air to clean elements.
Any leaks or damaged components in the engine air system?
If yes, report to the maintenance team.
Is the grill, oil cooler and radiator of engine cooling system clean from debris?
500 Hours Loader Maintenance
Replacement of filter in Fan / Hydraulic / Hydrostatic System
Replacement of reservoir breather cap
Replacement of Steering Valve Inline Filter (Aws Only)
Replacement of oil in Hydrostatic Motor Carrier (Track Machines Only)
Sign off on the 500 Hours Loader Maintenance
1000 Hours Loader Maintenance
Replaced fluid on Hydraulic Reservoir
Replaced fluid on Final Drive Transmission (Chaincase On Wheel Machines Only)
Replaced fluid (If required) in Track Roller, Idler Assemblies (Track Machines Only)
Replaced Drive Motor Case Drain Filter (If equipped)
Repacked wheel bearings, greased internal splines in hub yoke. (Dealer Service Only) Wheel Bearing & Outer Splines (Aws Only)
Sign off on the 1000 Hours Loader Maintenance
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX