Bobcat Excavator E20

Engine oil and filter replaced?

Debris cleaned from radiator / hydraulic fluid cooler?

Hydraulic Filter and Reservoir Breather Cap

Hydraulic filter and the reservoir breather cap replaced?

Alternator and Starter connections checked?

Fluid level of Travel Motors (Final Drive)

Drive Belts (Alternator) in good condition?

Drive Belts (Alternator) replaced?

Service at first 50 hours, then as scheduled

Sign off on the excavator maintenance

Fluid of travel Motors (Final Drive) replaced?

Hydraulic fluid and filters replaced?

Engine valve clearance adjusted?

Coolant replaced every 24 months?

Grease swing bearing and swing pinion

Service every 10 hours when operating in water

Check cables, connections, and electrolyte level of Battery

Drain water and sediment from fuel tank and fuel filter

Empty spark arrestor chamber Every 100 Hours

Sign off on the 50 Hours Excavator Maintenance

Check level of Engine Oil and add as needed

Check condition indicator of Engine Air Filters and Air System. Service only when required. Check for leaks damaged components

Check coolant level COLD and add premixed coolant as needed to Engine Cooling System

Check Fuel Filter for moisture or contamination. Drain and replace as needed

Check hydraulic fluid level and add as needed

Check the condition of seat belt and mounting hardware. Clean or replace seat belt retractors as needed. Check the control console lockout lever for proper operation. Clean dirt and debris from moving parts

Check for proper function of Motion Alarm

Check the Operator cab condition and mounting hardware

Clean Cab Heater Filters (if equipped)