Baker Hughes Everest Ca-Zoom HD 3068-7-0001

- Cables: Visually inspect the cables for integrity (connector outlet and outer sheath).

- Assemblies, screws and clamps: Make sure that the mounted parts and screws are not loose or damaged.

- Compressed air or CO2 must be applied to the camera head for underwater use. This protects the high-quality electronics in the event of leakage. The camera head either indicates the loss of tightness by periodically switching off the lights or by an alert on the control software (newer models).;

- If it is necessary to change the CO2 cartridge, slowly loosen the cartridge housing and check whether the CO2 cartridge has been completely emptied. When gas flows out, tighten the cartridge housing again, otherwise there may be danger of icing in this area. Use the pump until the CO2 cartridge is completely empty.;