Atlas Copco Drill Rig D50

Grease filled into the grease nipples

Cylinder bracket, breakout table torque

Cylinder bracket, pipe guide torque

Lock nut for adjusting screw, pipe guide torque

Sign off on the daily breakout table/rod guide service

Warning: Ensure the drill rig has been standing still for one hour before starting this procedure

Sign off on the compressor tank draining

Has the drill rig been standing still for 10 minutes?

Is the gauge in the green zone?

Sign off on the daily compressor tank oil level check

Lubrication oil seeping out of the drill bit

Plank placed in front of the drill bit

Plank becomes oily after a short time

Cleaning the system should take place at the end of the work shift

Rotating the cyclone and opening the cover plate

Two hatches on the intermediate chamber

Jones riffle splitter inspection hatch

Swinging the cone splitter out of the way

Rotary actuators, cylinders and shafts must not be cleaned with high-pressure washing, because any penetrating water may damage the components

Sign off on the cleaning procedure