Ametek Battery Charger Eclipse II

Warning: Ensure the unit is unplugged before starting the cleaning process

All dirt wiped from unit's interior components

All dirt blown out from unit's interior components

Enter the air pressure used for cleaning

Sign off on the cleaning process

WARNING: ELECTRICAL SHOCK HAZARD — All cabinet panels must be replaced to protect personnel from contact with hazardous voltages

Check if the unit is equipped with a fan

Check for proper unrestricted operation of the fan

Check and tighten all electrical connections

Check for broken wiring or damaged Insulation on wiring

WARNING: ELECTRICAL SHOCK HAZARD — Failure to keep internal parts clean and dry may allow transformer (s) to short out, causing secondary circuits to carry dangerously high voltage

Replace all charger cabinet panels after any servicing

Check if the output silicon diodes in this charger are protected by a “fast-clearing” type fuse

CAUTION: The use of any other type fuse besides the “fast-clearing” type may cause damage to silicon diodes