Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Western star Heat Pump Air Conditioning System with Recessed Condensing Unit ELSKOV3 - 24
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1 Yearly Unit Maintenance
Air Filter Maintenance
Clean the air filter periodically
Safety and Electrical Checks
Check efficiency safeties
Enter the power supply voltage
Enter the power consumption
Check tightness of electrical connections
Compressor and Pressure Verification
Check the state of the compressor
Pipes Leak Testing
Preparation
Close the valves of the liquid and gas
Batten down the taps on the gas and liquid side
Pressurization Steps
Pressurize the tubes at 0.3MPa (3.0 bar) for 3 minutes
Pressurize the tubes at 1.5MPa (15.0 bar) for 3 minutes
Pressurize the tubes at 3.0MPa (30.0 bar) for 24 hours
Leak Detection
Did the pressure drop during the test?
Refrigerant Charging
Preparation
Empty and dry the entire refrigerant circuit using a vacuum pump connected to the outlet of high pressure to the low outlet.
Connect the refrigerant cylinder to the gas outlet on the low pressure line.
Charging Refrigerant
Enter the quantity of refrigerant gas charged as indicated on the rating plate of the device.
Was the refrigerant charged in the liquid phase?
Checking Values
Enter the overheating value (°C).
Enter the undercooling value (°C).
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













