Werner Fiberglass Ladder FS104

The end user shall use his/her best judgment to determine when a ladder requires maintenance.

A good, general maintenance program should include the following:

1. All ladders should be cleaned of any build-up of dirt, grime, dust, grease, carbonaceous and other conductive materials. The cleaning effort ensures retention of the original electrical insulating characteristics and precludes a surface tracking condition. Regular washing and waxing will also greatly reduce the degree of surface degradation and potential fiber bloom. Wax slows down the entry of water but is invisible to U.V.

2. If the ladder is used indoors, there are fewer environmental concerns unless it is in a chemical environment. In that case, periodic inspection and possible coating may be warranted. Maintenance in a chemical environment requires specific consultation.

3. Ladders stored out-of-doors for extended periods of time can have the effect of weathering decreased by semi-annual waxing of the rails. Normally a good commercial non-slip paste wax, such as SC Johnson® Paste Wax, will reduce the possibility of glass fiber prominence.

4. Ladders employed in geographic locales with high U.V. ray exposure can have extended life and reduced potential for glass fiber prominence by periodic coating with certain acrylic lacquers, polyurethane coatings or similar materials. The U.V. additive employed in the resin formulation is gradually consumed during sunlight exposure. These subsequent coatings replace the U.V. screen or barrier.

5. A spot coating with a highly pigmented polyurethane resin is highly recommended when the ladder surface has been damaged by localized impact or abrasion. If there is any structural damage consult Werner Co. on repair or replacement or discard the ladder.

6. Ladders in service out-of-doors, where high humidity or high humidity coupled with intense U.V. ray exposure exists, may have their service life increased by applying a lacquer or paint coating and waxing.;