Pentland Wholesale Glass Door Cabinet BR1SS

Press and hold the DEFROST button for 5 seconds

Did the Defrost LED illuminate?

Duration of the defrost cycle in minutes

Is the automatic defrost timer reset?

Notes or observations during the defrost process

Press and hold the set button for 3 seconds till the C led starts blinking with the current set temperature shown

Use the arrow keys to adjust to the required set temperature setting

Press the set key to store the new temperature setting

Wait for approximately 5 seconds until the display shows the cabinet temperature

Note that the temperature shown on the display will fluctuate during normal use as the unit regulates the cabinet temperature

Switch off and disconnect from the power supply before cleaning

Clean the interior of the appliance as often as possible

Avoid using abrasive or corrosive cleaning agents or sprays

Ensure no harmful residues are left after cleaning

Clean the door seal with warm water and mild detergent

Ensure the appliance is turned off and unplugged

Gather necessary cleaning tools and materials

Remove any visible debris from the condenser coils

Use a vacuum cleaner to remove dust from the condenser

Wipe the condenser coils with a damp cloth

Check if the condenser is clean and free of debris