MSA Marine Heaters UT-S

1 Check completeness and appearance of the Product; mechanical damage, paint defects must be absent; legends shall be read easily;

2 Clean all surfaces by clean cloth;

3 Remove severe contamination, parts of corrosion, oil spots:

– from metal surfaces: by suds, avoiding its penetration inside the device; all surfaces clean dry by clean cloth and dry up;

– from LED: by alcohol soaked cloth.

Do not use hard cloth, paper, glass cleaning liquids or chemicals; Do not press hard on the surface while cleaning; Do not spray liquid directly to the surface of the Product;

4 In case of varnish damage clean it with abrasive cloth, then alcohol soaked cloth, cover with varnish АК-113 and let dry

Check reliability of cable connections and grounding buses

1 Check completeness and appearance of the Product; mechanical damage, paint defects must be absent; legends shall be read easily;

2 Clean all surfaces by clean cloth;

3 Remove severe contamination, parts of corrosion, oil spots:

– from metal surfaces: by suds, avoiding its penetration inside the device; all surfaces clean dry by clean cloth and dry up;

– from LED: by alcohol soaked cloth.

Do not use hard cloth, paper, glass cleaning liquids or chemicals; Do not press hard on the surface while cleaning; Do not spray liquid directly to the surface of the Product;

4 In case of varnish damage clean it with abrasive cloth, then alcohol soaked cloth, cover with varnish АК-113 and let dry

Check reliability of cable connections and grounding buses