Motovario Reducer NRMV-P 063

Ensure maintenance is done by a technician familiar with workplace safety legislation and environmental issues.

Do not dump polluting fluids, replaced parts or maintenance waste.

Pre-maintenance Safety Measures

Shut off power supply to the reducer/variator.

Take measures to prevent power from being turned back on involuntarily.

Prevent parts from being set in motion.

Ensure maintenance is performed by a qualified technician familiar with workplace safety legislation and environmental issues.

Shut off power supply to the reducer/variator.

Take measures to prevent power from being turned back on involuntarily.

Inform other operators and persons in the vicinity about the maintenance work.

Post notices around the area and prevent access to it.

Employ necessary environmental protection measures (dust, gas, etc.).

Check for external cleanliness, especially in areas most concerned with cooling.

Ensure maintenance is performed by a qualified technician familiar with workplace safety legislation and environmental issues.

Confirm that polluting fluids, replaced parts, or maintenance waste are not dumped.

Verify that no improvisation of repairs is done.

Shut off power supply to the reducer/variator.

Take measures to prevent the power supply from being turned back on involuntarily.

Ensure parts are prevented from being set in motion.

Inform other operators and persons in the vicinity.

Ensure maintenance is performed by a qualified technician familiar with workplace safety legislation and environmental issues.

Do not dump polluting fluids, replaced parts, or maintenance waste.

Shut off power supply to the reducer/variator and take measures to prevent it from being turned back on involuntarily.

Inform other operators and persons in the vicinity, and post notices around the area to prevent access.

Employ all necessary environmental protection measures (dust, gas, etc.).

Is the unit life lubricated without oil plugs?

If yes, confirm no special maintenance is required except for previous checks.

Warning! Maintenance must be done by a technician familiar with workplace safety legislation and environmental issues.

Do not dump polluting fluids, replaced parts or maintenance waste.

Caution! Before working on the reducer/variator shut off its power supply, and take measures to prevent its being turned back on involuntarily and to prevent its parts being set in motion.

Inform other operators and persons in the vicinity, and post notices around the area and prevent access to it.

Employ all necessary environmental protection measures (dust, gas, etc.).

Check for lubricant leaks around the seal rings.

Record any lubricant leaks found.

Ensure all safety measures are in place before starting the procedure.