MODINE Unit Heater HDS090SS0111FBAN

Acknowledge understanding of using only factory-approved service replacement parts

Acknowledge understanding of the risk of substituting parts or controls not approved by the factory

Ensure the following precautions are taken

Are you trained and familiar with the operation of unit heaters and their controls?

Turn off gas at the manual shut-off valve ahead of the combination gas control

Turn off all electric power to the heater

Ensure the gas is turned off at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Verify the following components for cleanliness and tightness

Check if the gas controls are operating properly.

Replace any mechanical or electrical controllers that have been wet.

Record the appliance model number, serial number, and company address from the rating plate.

Ensure gas is turned off at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Verify the following information from the rating plate on the appliance

Are all replacement parts factory-approved?

List any non-approved parts used and note the risk involved.

Ensure all service and repairs use factory-approved replacement parts.

Verify the appliance model number, serial number, and company address from the rating plate.

Confirm that servicing is performed by a qualified service agency.

Ensure no attempt is made to reuse any mechanical or electrical controllers that have been wet.

Turn off gas at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Ensure gas is turned off at the manual shut-off valve ahead of the combination gas control.

Turn off all electric power to the heater.

Check fan for fit on motor shaft.

Verify use of factory-approved service replacement parts only.

Were any mechanical or electrical controllers wet?