Life Fitness Fixed Crossover MJFXO-STA

Visually inspect all hardware for loosening, tampering or wear

Check Jam Nut at top of weight stack for tightness

Inspect all accessories, connecting links, and carabiner clips for wear

Check cables for stretch and adjust as necessary by loosening the large Jam Nut on top of the weight stack and by screwing in the Threaded Plug until cable is tight and the weight stack pin goes in all holes easily

Securely tighten the large Jam Nut when finished

Warning: This maintenance check requires trained personnel with PPE!

Clean hand grips with an approved or compatible cleaner

Wax frames with a standard, non-abrasive, wax finish

Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000)

Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary

Clean the Shrouds with an approved cleaner

Minimize Scratches on the shrouds

Remove fresh paint splashes, grease and smeared glazing compounds before drying by rubbing lightly with isopropyl alcohol

Use Life Fitness Approved Cleaners (PureGreen 24 and Gym Wipes) for cleaning

Warning: This maintenance check requires trained personnel with PPE!

Clean upholstery with an approved or compatible cleaner

Wipe down upholstery with a mild soap and water or comparable all purpose cleaner

Inspect cables for wear or damage and proper tension

Inspect shrouds for damage and clean as necessary

Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary

Spray the approved cleaner on a towel, and then wipe down the shrouds to avoid saturation of shroud inlays