Life Fitness Barbell Rack FW-BAR

- Visually inspect all hardware for loosening, tampering or wear.

- Check condition of hand grips.

• Hardware. Check for loosening. Tighten as required.

• Belts. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.

• Frames. Inspect for wear and damage.

• Hand grips. Check for wear and damage.

Warning: Use only approved or compatible cleaners for this procedure

Clean upholstery with an approved or compatible cleaner

Note any shoe scuffs on powder coated surfaces

Time in minutes PureGreen 24 was left on the equipment for disinfection

Time in minutes Gym Wipes were left on the equipment for disinfection

Note any issues found during cleaning

Sign off on the daily barbell rack maintenance

Warning: Use only approved or compatible cleaners for this procedure

Clean hand grips with an approved or compatible cleaner

Wax frames with a standard, non-abrasive, wax finish

Use polishing compound (such as car wax) and remove shoe scuffs from powder coated surfaces as necessary

Note: Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning

DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the equipment surfaces

Sign off on the barbell rack maintenance