Hytrol Minimum Pressure Live Roller Conveyor Hytrol 138-ACC

Warning: This procedure requires trained personnel with PPE!

Is the drive chain pre-lubricated from the manufacturer?

If not, apply a good grade of non-detergent petroleum or synthetic lubricant (i.e., Mobile 1 Synthetic)

Enter the hours of operation since last lubrication

Enter the date of last lubrication

Select the operating environment

For harsh conditions, it is best to lubricate more frequently and develop a custom lubrication schedule

Enter the details of the custom lubrication schedule (if applicable)

Was the lubrication successful?

1. . . Check length of section in which belt is to be replaced.

2. . . Determine if a “long” or “short” belt is needed. (Figure 19A).

3. . . See Parts List for correct replacement number, Pages 26 & 27. See NOTES in page 19.

1. . . Using knurled nuts, lower belt away from tread rollers in section belt is being replaced.

2. . . Remove five tread rollers from each end of section.

3. . . Remove all pressure rollers.

4. . . Replace belt and all rollers.