Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more
Hussmann Open Fish Sevice Case DSFN-EP-3-R
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Honeycomb Removal & Cleaning
CAUTION: DO NOT TEAR THE HONEYCOMB
Remove the honeycomb assembly
Describe the condition of the honeycomb after removal
Amount of powdered detergent used in tablespoons
Clean the honeycomb
Describe the condition of the honeycomb after cleaning
Dry the honeycomb
Install the honeycomb
Sign off on the honeycomb removal & cleaning
6 Monthly Open Fish Service Case Maintenance
Warning: This maintenance check requires trained personnel with PPE!
Is the discharge honeycomb clean?
Is there any accumulated dirt in the condenser coil?
Is there any accumulated dirt in the condensate evaporator pan?
Poor circulation of air through the condenser coil will result in poor refrigeration performance.
Is there poor circulation of air through the condenser coil?
Dirt accumulation inside the condensate evaporator pan will reduce the pan’s capacity and affect the efficiency of the heater causing a burned out heater and an overflow of defrost water onto the store floor.
Is there dirt accumulation inside the condensate evaporator pan?
Is the power supply to the equipment reliable?
Fan Blade Replacement
WARNING! ALWAYS DISCONNECT THE ELECTRICAL POWER AT THE MAIN DISCONNECT WHEN SERVICING OR REPLACING ANY ELECTRICAL COMPONENT OF THIS REFRIGERATOR. THIS INCLUDES, BUT IS NOT LIMITED TO SUCH ITEMS AS FANS AND THERMOSTATS.
The evaporator fan is located directly under the deck pan.
Fan blade needs servicing?
ALWAYS REPLACE THE FAN BLADE WITH THE RAISED EMBOSSING SIDE OF THE BLADE INSTALLED TOWARD THE MOTOR.
Sign off on the fan blade replacement
Case Cleaning
Warning: Shut off fan before cleaning. Do not use water hoses, chlorinated cleaner, abrasives or steel wool scouring pads, cleaning or sanitizing solution that has an oil base or an ammonia base.
Fan shut off before cleaning?
Interior bottom wiped with domestic soap or detergent based cleaners?
Exterior cleaned with water and a mild detergent?
Interior wiped with damp non-abrasive cloth?
Sanitizing solution used to eliminate bacteria?
Visible debris surrounding or on top of the drain location cleaned?
All surfaces scrubbed thoroughly with soap and hot water?
Rinsed with hot water without flooding?
Non-Glare Glass Cleaning
1. The high optical clarity of this glass is possible due to special coatings on the glass surface itself.
2. To preserve this coating and the optical clarity, keep the glass clean. 3. Water is the only solution recommended to be used to clean the non-glare glass.
4. The damage to the glass from improper, caustic solutions is irreparable.
5. In addition to cleaning the glass with the recommended product, there are precautions that should be taken when working and cleaning the inside of the case.
• When cleaning the inside of the cases, we recommend that the glass be fully opened and covered to prevent to prevent solutions from splashing onto the glass and ruining the coating on the inside.;
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX