Hoshizaki Self-Contained Modular Cuber IM-65PE

Unplug the icemaker from the electrical supply network

Confirm that no water jet is used for cleaning

Read and understand the instructions for using a neutral cleaner or sodium hypochlorite

Ensure water temperature is below 40°C for cleaning plastic parts

Has a trained service person been asked to clean and sanitise the icemaker water system?

CAUTION: Read instructions for cleaners

Soak the scoop in the sanitising solution

Wash the storage bin handle with a neutral cleaner

Rinse the storage bin handle thoroughly

Sanitise the handle with the solution

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Use a neutral cleaner or sodium hypochlorite as per instructions

Ensure plastic parts are not cleaned with water above 40°C or in a dishwasher

Request a trained service person to check and clean the condenser

Unplug the icemaker from the electrical supply network

Confirm no water jet is used for cleaning

Wipe the exterior with a clean, soft cloth

Use a damp cloth with a neutral cleaner to remove grease or dirt

Treat external surfaces with a stainless steel care product

Unplug the icemaker from the electrical supply network

Ensure no water jet is used for cleaning

Storage Bin Interior Cleaning/Sanitisation (Weekly)

Open the storage bin door and remove all ice

Wash the bin liner with a neutral non-abrasive cleaner and rinse thoroughly

Soak a clean cloth with the neutral cleaner and wipe both sides of the slope and the door inner surface

Wipe off the cleaner with a clean damp cloth

Mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution or use the recommended Hoshizaki sanitiser as directed