Daikin Split System Air Conditioner FCAG125BVEB

Warning: This procedure requires trained personnel with PPE!

Shortening of 'maintenance cycle' and 'replacement cycle' needs to be considered in following situations:

The unit is used in locations where:

Recommended replacement cycle of wear parts

NOTICE: The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of replacement cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Contact your dealer for details.

INFORMATION: Damage due to taking apart or cleaning interiors of units by anyone other than our authorised dealers may not be included in the warranty.

Warning: This procedure should be performed by trained personnel only.

Note: The unit may require more frequent maintenance and filter replacement in certain conditions such as high heat and humidity, frequent power fluctuations, frequent bumps and vibrations, presence of dust, salt, harmful gas or oil mist in the air, frequent start and stop of the machine, or long operation times.

Check if the unit is used in any of the above mentioned conditions.

If the unit is used in any of the above conditions, consider shortening the maintenance and replacement cycles.

Check the condition of the High Efficiency Filter.

If the filter is damaged or worn out, it needs to be replaced.

Upload a photo of the replaced filter.

Sign off on the filter replacement.

Note: Contact your dealer for more details about maintenance and inspection contracts.

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

Inspect Sensor (thermistor, etc.)

Inspect User interface and switches

Be aware that the mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Sign off on the electric motor replacement

NOTICE: The mentioned maintenance and replacement cycles do not relate to the warranty period of the components.

The table assumes the following conditions of use:

The table indicates main components. Refer to your maintenance and inspection contract for more details.

The table indicates recommended intervals of maintenance cycles. However, in order to keep the unit operational as long as possible, maintenance work may be required sooner. Recommended intervals can be used for appropriate maintenance design in terms of budgeting maintenance and inspection fees.

Depending on the content of the maintenance and inspection contract, inspection and maintenance cycles may in reality be shorter than listed.

Enter the current operating hours of the unit

Sign off on the expansion valve maintenance