Crown Walkie Pallet Truck PW3510-60

CHECK YOUR TRUCK BEFORE STARTING WORK

All wheels are in good condition

Twist grips are in good condition

Both forks are secure and not bent, cracked or badly worn

Load backrest is in place and secure

No signs of hydraulic leaks under the truck

Test drive in an uncongested area

Try all the hydraulic functions

Operate the truck slowly in both directions

Operate through the full speed range in both forward and reverse

If the braking distance is too long to stop safely, don't use the truck

DANGER! TRUCK BATTERIES CAN BE DANGEROUS

Turn the truck OFF. Check that all controls are in neutral

Make certain you use the correct size and weight battery

Never let anything metal touch the top of the cells. Use an insulator (such as plywood) when necessary

Use an approved spreader bar to place a battery in, or remove it from, the battery compartment or a stand

If you use a roller stand to install or remove a battery, make sure the roller stand is the same height as the rollers in the truck's battery compartment. Also make sure the roller stand is at least as long as your battery

Replace the battery retainers. Make certain the retainers on both sides of the truck are in place

Connect the battery. Turn the truck ON and check truck operation

Do not try to install, remove, charge or service your truck battery unless you are trained and authorized