The Crown Narrow-Aisle Reach Truck RR 5795S is a high-performance industrial lift designed for efficient warehouse operations. Known for its compact design and advanced maneuverability, this reach truck enhances productivity in tight spaces, making it an ideal choice for modern logistics and material handling.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for Crown Narrow-Aisle Reach Truck RR 5795S

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Crown Narrow-Aisle Reach Truck RR 5795S

Create an account to install this asset package.

Maintenance Plans for Crown Narrow-Aisle Reach Truck Model RR 5795S

Integrate maintenance plans directly into your work orders in MaintainX.

1 Daily Truck Test

Test your truck in an uncongested area

Test the hydraulic functions

Check the steering

Operate the truck slowly in both directions

Operate through the full speed range in both forward and reverse

Check braking distance in forward and reverse. Load size and floor conditions can affect these distances

Know the distance it takes to stop before you start working. If the braking distance is too long to stop safely, don't use the truck

If anything doesn't look, work or feel right, don't drive the truck. Report the problem to your supervisor

Upload the checklist forms from your Crown dealer (part no. OF-3772). Used properly, this checklist can alert service people to needed repairs

Run this procedure

1 Daily Truck Check

- CHECK YOUR TRUCK BEFORE STARTING WORK

You must make sure your truck is safe to use

- Walk around your truck and check it over

- Inspect your harness, tether, snap hooks and mounting points. Have them replaced if they look damaged or worn or have ever been used to stop a fall

- Check to make sure the battery is charged, water level is OK and vent caps are in place. Don't use an open flame to check the battery

- Make certain the battery retainer and side cover are properly installed and adjusted

- See that all wheels are in good condition

- Clean the safety glass

- Check that both forks are secure and not bent, cracked or badly worn

Run this procedure

Battery Maintenance

- Change Batteries

WHEN YOU INSTALL OR CHANGE BATTERIES:

1. Turn the truck OFF. Disconnect the battery

Check that all controls are in neutral

2. Make certain you use the correct size and weight battery

Never operate a truck that has an underweight or undersized battery installed

3. Use a roller stand to install or remove a battery. Make sure the roller stand is the same height as the rollers in the truck's battery compartment. Also make sure the roller stand is at least as long as your battery

4. Never let anything metal touch the top of the cells. You could cause sparks or do damage to the battery. Use an insulator (such as plywood) when necessary

5. Use an approved spreader bar to place a battery on, or to remove it from a stand. Make sure you adjust the spreader bar hooks to fit the battery

Run this procedure