Crown Heavy-Duty Walkie Reach Stacker SH 5520-1.8

Test drive your truck in an uncongested area

Check that steering is smooth and easy

Operate the truck slowly in both directions

Operate through the full speed range in both forward and reverse

Check braking distance in forward and reverse at a slow speed. Load size and floor conditions can affect these distances

Know the distance it takes to stop before you start working. If the braking distance is too long to stop safely, don't drive the truck

If anything doesn't look, work or feel right, don't drive the truck. Report the problem to your supervisor

Report any issues found during the test

CHECK YOUR TRUCK BEFORE STARTING WORK

All wheels are in good condition

Both forks are secure and not bent, cracked or badly worn

Load backrest is in place and secure

No signs of hydraulic leaks under the truck

Your truck has a single industrial battery

To use an external charger, follow the directions on the charger provided

To use a charger built into the truck you must have access to an AC electrical outlet. To charge batteries:

1. Turn the truck off. Do not disconnect the battery

2. Use an extension cord less than 7.5 meters (25ft) long with a wire size of 16 AWG or heavier