Boss Snowplow Liquid Ice Control LIQ28847

- Service the in-line filter screen.; - Clean the salt hopper.

- 1. Clean the area around the in-line filter cap (Figure 13).; - 2. Remove the in-line filter cap and check the screen for clogging.; - 3. If the screen is clogged, clean the screen.; - 4. Inspect the gasket. Replace it if it is worn or has cracks.; - 5. Install the in-line filter cap.

- 1. Unplug the pump motor from the electrical outlet.; - 2. Clean the area inside the salt hopper of any debris or rocks (Figure 4).;

- 1. Unplug the pump motor from the electrical outlet.; - 2. Clean the salt hopper; refer to Cleaning the Salt Hopper (page 15).; - 3. Remove the salt hopper to gain access to the tank.; - 4. Clean the inside of the tank and remove any debris or rocks.; - 5. Install the salt hopper.;