Bosch Refrigerator B22CT80SNS01

Turn off the water supply before starting the procedure

Filter turned counterclockwise and removed

Sealing label removed from replacement filter

Replacement filter inserted into the filter head

Filter turned clockwise until it stops

Is the dispenser feature used without a water filter installed?

If the dispenser feature is used without a water filter, replace the filter with the blue bypass cap

Unplug the refrigerator or disconnect power

Replace the burned-out LED bulb(s) with a bulb of the same size, shape and wattage

Plug in refrigerator or reconnect power

NOTE: Some LED replacement bulbs are not recommended for wet/damp environments. The refrigerator and freezer compartments are considered to be wet/damp environments. If using a brand of LED bulb other than the Bosch recommended LED bulb, before installation, read and follow all instructions on the LED packaging.

Sign off on the light bulb replacement

Unplug refrigerator or disconnect power

Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water

Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water

Plug in refrigerator or reconnect power

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly

Sign off on the refrigerator cleaning

Vacuum cleaner with a soft brush used to clean the grille

Open areas behind the grille and the front surface area of the condenser cleaned

Base grille replaced when finished

Sign off on the condenser cleaning