Bosch Dishwasher SHE65T55UC

Check spray arms for grease and limescale deposits

If deposits are found, follow the steps below

Fill detergent dispenser 92 with detergent and start the appliance without utensils in the cycle with the highest rinsing temperature

Clean the appliance with detergents/appliance cleaners which are particularly suitable for use with dishwashers

Unscrew the upper spray arm and pull off the lower spray arm as shown. Inspect for deposits

Sign off on the spray arms maintenance

Warning: Disconnect the appliance from the power supply before starting the procedure.

Foreign objects removed from inner compartment

Warning: Use caution when removing parts for cleaning as some debris may be sharp.

Note: The drain pump will not work properly if the drain pump cover is not snapped in completely until it clicks.

Warning: Never use a steam cleaner to clean your dishwasher. The manufacturer is not liable for any resulting damage.

Front of the appliance cleaned with a damp cloth and a small amount of liquid soap

Do not use bleach-based wipes as they could damage the surface or printing.

Stainless steel appliances cleaned with a stainless steel polish

Do not use chlorine based cleaners or wipes.

Outer edges of the inside door panel cleaned regularly to remove debris

Door seal cleaned regularly with a damp cloth to remove food particles

Sign off on the dishwasher cleaning

Warning: This procedure requires trained personnel with PPE!

Food soils remaining on the filter system or objects trapped in the Large Object Trap?

Frequency of filter cleaning based on usage

Clean the filter after washing loads with large amounts of food soils or loads with a heavy starch content, like potatoes and pasta, to maintain optimal performance.

Unscrew the Large Object Trap and remove the entire filter system?

Remove any residue and clean filters by rinsing under running water? Note: do not use abrasive brushes or steel wool, etc., as they may damage the filter.

Reinstall the filter system in reverse sequence and lock into place by screwing the Large Object Trap until the marking arrows align?

Sign off on the filter cleaning