Bosch Dishwasher SGV78B53UC

Check the filters for residues after each dishwashing cycle

Turn the coarse filter counterclockwise and take out the filter system. Ensure that foreign objects do not fall into the sump

Pull the micro filter downward and off

Press the locking catches together and take the coarse

Clean the filter elements under running water. Carefully remove the rim of debris between the coarse filter and the fine filter

Put the filter system back together. Ensure that the locking catches on the coarse filter click into position

Insert the filter system into the appliance and turn the coarse filter clockwise. Ensure that the arrow markings match up

Sign off on the filter cleaning

Warning: Ensure the dishwasher is turned off and disconnected from the power source before starting the cleaning process.

Unscrew the upper spray arms and pull down to remove.

Pull up the lower spray arm to remove.

Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign objects.

Insert the lower spray arm until it clicks into position.

Insert the upper spray arms and screw firmly in place.

Sign off on the spray arms cleaning

Deposits, e.g. from food remnants and limescale, can cause your appliance to malfunction. To avoid these problems and reduce odors, we recommend cleaning your appliance at regular intervals. Machine Care combined with machine cleaning products will provide the right care for your appliance.

Machine Care is a program which removes various deposits in one wash cycle. Cleaning takes place in two phases.

To ensure optimal cleaning performance, the program doses the cleaners independently of each another during the relevant cleaning phase. Therefore, it's important to place the cleaners correctly.

Run Machine Care without dishware if the indicator for Machine Care lights up on the control panel or if advised to do so by the display. The indicator will go out after you have run Machine Care. If your appliance does not have a reminder function, we recommend performing Machine Care every 2 months.

Run the Machine Care program without any dishes in the dishwasher.

Only use machine care products and machine cleaners specially designed for dishwashers.

Make sure that there are no aluminum items, e.g. vent hood grease filters or aluminum pans, in the interior of the appliance.

If you have not run Machine Care after 3 wash cycles, the indicator for Machine Care will go out automatically.

For optimal cleaning performance, ensure the correct placement of cleaners.

WARNING! Using detergents containing chlorine may result in harm to health. Never use detergents containing chlorine.

Heavy soiling in the interior removed with a damp cloth

Type of detergent added to the dispenser

Program started without dishware