Bardiani Valvole Pneumatic Butterfly Valve ZVF DN10

Ensure the line is stopped and all utilities are disconnected

Discharge the fluid pressure in the valve and piping

Wear protective gloves to prevent burns

Check valve gaskets for correct operation and leaks

Record actions carried out for valve gaskets

Check actuator gaskets for correct operation and leaks

Ensure the line is stopped and all utilities (electricity, compressed air) are disconnected.

Discharge the fluid pressure in the valve and piping before disassembling the valve.

Wear protective gloves to prevent burns from hot valves and piping.

Replace actuator gaskets after 24 months.

Replace actuator gaskets in the event of leaks.

Ensure the line is stopped and all utilities are disconnected

Discharge the fluid pressure in the valve and piping

Wear protective gloves to prevent burns

Replace gaskets after 12 months

Check for leaks and replace gaskets at the end of the day if necessary

Wear protective safety glasses and gloves

Ensure the valves and piping are not too hot before proceeding

Check for hand crushing hazards

Enter the detergent concentration value used

Did you follow the detergent manufacturer's instructions?

Was the detergent accurately dosed to avoid excessive concentration?