Avantco Holding Cabinet 177HEAT1836I

Turn off the machine and disconnect it from the power source.

Perform a complete cleaning process as outlined in the 'Cleaning' section.

Use a damp cloth to wipe down all exterior surfaces, including handles, sides, and door.

Dry all wiped areas with a clean, dry towel to prevent moisture buildup.

Turn off and disconnect the machine from the power source

Inspect the plug and cord for any indications of excessive wear

Check the integrity of electrical cords and plug points

Were any issues detected during the inspection?

Ensure the power cord is not plugged in and the cord is off the ground

Wipe down both sides of the door panel using a cleaner recommended for polycarbonate plastics and a clean cloth

Use isopropyl rubbing alcohol or a small amount of liquid dish detergent diluted with water to remove tough grease smudges, dirt, or fingerprints

Apply paste wax recommended for polycarbonate plastics and approved for food service equipment to hide small scratches and return luster and clarity to the door panel

Schedule an annual service appointment with a certified technician

Replace any worn-out or damaged parts

Obtain a detailed service report for your records

Unplug the cabinet from the electrical outlet

Ensure the cabinet is completely cooled down

Cleaning the Cabinet Interior & Exterior (Excluding Door Panel)

Ensure the power cord is not plugged in and the cord is off the ground

Remove the heated control drawer module

Wipe down all interior and exterior surfaces excluding the polycarbonate door panel using a mild detergent and a clean cloth

Wipe down all surfaces with a clean cloth and let air dry

Replace the heated control drawer module