The Atlas Copco Oil-injected Rotary Screw Compressor G22 is a high-performance industrial compressor designed for reliability and efficiency. Ideal for various applications, this model ensures optimal air delivery while minimizing energy consumption, making it a preferred choice for businesses seeking robust compressed air solutions.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for Atlas Copco Oil-injected Rotary Screw Compressor G22

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Atlas Copco Oil-injected Rotary Screw Compressor G22

Create an account to install this asset package.

Maintenance Plans for Atlas Copco Oil-injected Rotary Screw Compressor Model G22

Integrate maintenance plans directly into your work orders in MaintainX.

1000 Hourly Belt Tension Adjustment

Warning: Ensure the compressor is stopped and the voltage is switched off before starting the procedure

Compressor stopped and air outlet valve closed

Voltage switched off

Front door, internal panel, top cover and pulley protection removed

4 bolts loosened by one turn

Belt tension adjusted by turning tensioning nut

Enter the force and deflection values

Bolts retightened

Bodywork panels refitted

Run this procedure

1000 Hourly Belt Tension Check

Warning: Ensure the compressor is stopped and the voltage is switched off before proceeding

Air outlet valve closed

Front door and internal panel removed

Measure the force and deflection

Refer to the sticker on the frame for the values to be measured

Bodywork panels refitted

Sign off on the belt tension check

Run this procedure

1000 Hourly Oil Cooler Cleaning

Warning: Never use a wire brush or metal objects for cleaning.

Oil cooler clean?

Upload a photo of the cleaned oil cooler

Sign off on the oil cooler cleaning

Run this procedure

1 Daily Oil Level Check

Run the compressor until warm

Stop the compressor, close the air outlet valve and switch off the voltage

Depressurize the air receiver by opening drain valve

Open the front panel

Depressurize the compressor by unscrewing filler plug one turn to permit any pressure in the system to escape. Remove the plug after the system is depressurized

Wait 5 minutes for the foam in the oil collector to disappear

Check the oil level through the sight-glass. If the oil level is lower than the minimum level, add oil until the maximum level is reached

Never mix oils of different brands or types. A label, indicating the type of oil filled ex-factory, is attached on the air receiver/oil tank

Before carrying out any operation on the machine, ensure that the electric power supply has been disconnected and that the machine has been depressurized

Run this procedure

4000 Hourly / 1 Yearly Oil Filter Change

Run the compressor until warm

Stop the compressor, close the air outlet valve and switch off the voltage

Depressurise the compressor by unscrewing filler plug one turn to permit any pressure in the system to escape

Remove the plug after the system is depressurised

Depressurise the air receiver by opening drain valve

Remove plug, drain the oil by opening drain valve

Close the valve and refit the plug after draining

Deliver the drained oil to the local oil collection service

Remove oil filter and separator

Run this procedure