Back
Manufacturing / Industrial • Inspections

Manual Injection Pump Cleaning

This procedure details manual cleaning of the injection pump, including draining and cleaning left and right reservoirs, washing filters, and refilling with 46 hydraulic fluid. It also prompts technicians to assess and, if needed, replace filters on both sides before reassembly and return to service.
TUOPU GROUP MEXICO
09/25/2025

Manual Injection Pump Cleaning

This procedure details manual cleaning of the injection pump, including draining and cleaning left and right reservoirs, washing filters, and refilling with 46 hydraulic fluid. It also prompts technicians to assess and, if needed, replace filters on both sides before reassembly and return to service.

    Manual Injection Pump Cleaning

    Section #1

    Does the filter need to be replaced on the LH side?

    • Yes
    • No
    • N / A

    If yes, was the filter replaced on the LH side?

    • Yes
    • No
    • N / A

    Refill reservoir with 46 hydraulic fluid on the LH side

      Section #1

      Does the filter need to be replaced on the RH side?

      • Yes
      • No
      • N / A

      If yes, was the filter replaced on the RH side?

      • Yes
      • No
      • N / A

      Refill reservoir with 46 hydraulic fluid on the RH side

      Source: TUOPU GROUP MEXICO (Community Member)

      Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.