LDA Soldering Iron Verification
This procedure outlines checks of the LDA soldering iron’s condition and performance to verify that it meets the required acceptance criteria before use.
ECCO Safety Group - Boise
10/05/2026
LDA Soldering Iron Verification
The aim is to confirm that the soldering iron meets the required operating specifications and is suitable for use. Verification helps identify temperature inconsistencies, equipment defects, or other issues that could affect solder joint quality, supporting reliable soldering and consistent workmanship.
800°F (Tolerance ± 75)
Meter name
Unit
if the answer is "> 875 "
Out Of Tolerance
Torque Drivers: adjust with tool. Soldering Irons: replace tip If help is needed contact your Supervisor or Maintenance Technician.
800°F (Tolerance ± 75)
Meter name
Unit
if the answer is "< 725 "
Out Of Tolerance
Torque Drivers: adjust with tool. Soldering Irons: replace tip If help is needed contact your Supervisor or Maintenance Technician.
800°F (Tolerance ± 75)
Meter name
Unit
800°F (Tolerance ± 75)
Meter name
Unit
if the answer is "> 875 "
Out Of Tolerance
Torque Drivers: adjust with tool. Soldering Irons: replace tip If help is needed contact your Supervisor or Maintenance Technician.
800°F (Tolerance ± 75)
Meter name
Unit
if the answer is "< 725 "
Out Of Tolerance
Torque Drivers: adjust with tool. Soldering Irons: replace tip If help is needed contact your Supervisor or Maintenance Technician.
800°F (Tolerance ± 75)
Meter name
Unit
Source: ECCO Safety Group - Boise (Community Member)