To empty the glass trap:
Clean outer door with warm soapy water and a dishcloth or sponge. Rinse with clean water and a dry cloth. Do not use harsh cleaners.
The inside of the dishwasher and fi lter are self-cleaning with normal use. If needed, clean around the tub gasket area with a damp cloth. The fi lter is self-cleaning. A glass trap located in the center of the fi lter is designed to collect pieces of broken glass, straws, bones and pits.
Overfi ll Protector- keeps dishwasher from overfi lling and is located in the left front corner of the tub.
Care of Drain Air Gap
If a drain air gap was installed for your built-in dishwasher, check to make sure it is clean so the dishwasher will drain properly. A drain air gap is usually mounted on countertop and can be inspected by removing the cover. This is not part of your dishwasher and is not covered by warranty.
A dishwasher left in an unheated place should be protected from freezing. Have a qualifi ed person do the following:
To Disconnect Service:
To Restore Service:
Source: MaintainX (Community Member)