125 Hour Compressor Inspection

Inspect and clean exterior surfaces.

• Wipe down all exterior surfaces to remove dust and debris

• Ensure the area around the compressor is clean and free of obstructions.

Area Clean?

• Pass
• Flag
• Fail

Check Oil Levels.

• Check the oil level using the dipstick or sight glass.

• Add oil if the level is below the recommended mark.

Drain Condensate from Air Receiver Tank.

• Open the drain valve to release any accumulated condensate.

• Ensure the valve is closed securely after draining.

Condensate Drained?

• Pass
• Flag
• Fail

Inspect and Clean Air Filters

However, the air filter cartridge should be replaced at the latest as specified in Section 10.3. Check air filter at least once a week or, if required, daily for the accumulator of dust. When carrying out maintenance work, make sure that no dirt gets to the clean air side of the air filter.

• As a standard, the air filter is provided with a visual in-take filter monitor (-2- Fig. 20), which indicates clogging of the air filter cartridge.

• When the red service field of the intake filter monitor is visible and remains clicked into position while the screw compressor is out of operation, replace the air filter cartridge.

Air Filters

• Pass
• Flag
• Fail

Additional notes (if necessary):

Completed by,