Back
Manufacturing / Industrial • Inspections

TPM Press Task - Tasks 4, 5, and 6 process breakdown - Monthly

The TPM press maintenance process ensures comprehensive monthly maintenance and breakdown of Tasks 4, 5, and 6.
MiTek
04/05/2024

TPM Press Task - Tasks 4, 5, and 6 process breakdown - Monthly

The TPM press maintenance process ensures comprehensive monthly maintenance and breakdown of Tasks 4, 5, and 6.

    Perform a visual check for oil leaks around the oil pump, seals, oil filter, gear housings, and covers.

    • Pass
    • Flag
    • Fail

    Inspect lubrication lines around the press for cracked, crushed, or damaged tubing or fittings. Replace any faulty components discovered during the inspection.

    • Pic1.PNG
    • Pass
    • Flag
    • Fail

    Make sure all the lubrication lines are unrestricted for the flow of oil.

    • Pass
    • Flag
    • Fail

    Check the airline filter bowl gauge for any water content.

    • Pic2.PNG
    • Pic3.PNG
    • Pass
    • Flag
    • Fail
    • Pic4.PNG
    • Pic5.PNG

    Signature of Inspector

    Click here to sign

    Date and Recording

Source: MiTek (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Global Procedure Library is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.