Stretch Line 104 Weekly Preventive Maintenance
Performing maintenance tasks on a weekly basis ensures that machinery and systems remain in peak working condition. By checking for wear, lubrication needs, loose parts, or calibration issues, organizations can reduce the risk of unexpected breakdowns. This proactive approach improves uptime and minimizes disruptions to production or services.
Amcor - PRY
10/13/2025
Stretch Line 104 Weekly Preventive Maintenance
Performing maintenance tasks on a weekly basis ensures that machinery and systems remain in peak working condition. By checking for wear, lubrication needs, loose parts, or calibration issues, organizations can reduce the risk of unexpected breakdowns. This proactive approach improves uptime and minimizes disruptions to production or services.
LOCKOUT/TAGOUT PROCEDURES MUST BE FOLLOWED AT ALL TIMES
APPROPRIATE PPE MUST BE WORN AT ALL TIMES
WAS THIS PM PERFORMED AT THIS TIME, IF YES CONTINUE, IF NO EXPLAIN WHY AND FILL OUT DATE AND SIGNATURE BELOW
DATE
TECHNICIAN SIGNATURE
Click here to sign
Check all bearings for plastic buildup
Check correct operation of scrap winder, repair as req
Check hydraulic reservoir levels, fill as req
Check resin pump oil levels, fill or replace as req
Check resin pump filter, clean/replace as req
Check blender operation and condition, recalibrate as req
Check for any air leaks on complete line, repair as req
Check for any oil leaks on line, repair as req
Check extruder gearbox levels, fill as req
Check auger gearbox levels, fill as req
Verify proper operation of screenchangers-leaks
Verify winder proximity switches are working, repair as req
Verify position/operation of chuck proximity switches
Verify belt conditions and alignment
Check spindles for damage, wear and function, repair as req
Check winder gearboxes and couplings for wear, repair as req
Check grinder, repair as req
Check rotator heats, verify correct temp, repair as req
Check die and rotator electrical connnection, repair as req
Check air ring hoses, repair/replace as req
Check ibc hoses, repair/replace as req
Check idler rollers from winder to tower, repair as req
Check tower nip gearbox, chain, belt, sprockets, repair as req
Check condition of tower nip and winder nip, repair as req
WINDER SPINDLE SHAFT SUPPORT
THINGS TO CHECK FOR: LINE 104
UPPER SPINDLE 1
UPPER SPINDLE 2
LOWER SPINDLE 1
LOWER SPINDLE 2
If an item requires repair and needs to be scheduled, enter it as a separate work order so it can be addressed in a timely matter. if it is a safety concern, shut equipment down and repair immediately. either way enter repair work order # in the space above and explain in comments what was done
Source: Amcor - PRY (Community Member)