SHUT DOWN PPM

004W_MECH_S_TRAY WASHER

• CHECK/REPAIR WHITE PLASTIC CHAIN. MEASURE THE DISTANCE BETWEEN TWO RIVETS ON A STETCHED OUT CHAIN. IF THE DISTANCE EXCEEDS 53mm REPLACE THE CHAIN AND CHAIN WHEELS.

• CHECK GEARBOXES. GEARBOXES WITHOUT PLUGS FOR FILLING HAVE BEEN LIFE LUBRICATED. IF A LEAK DEVELOP, GEARBOX SHOULD BE OVERHAULED. GEARBOXES WITH FILLER PLUGS SHOULD BE CHECKED VIA THE FILLER PLUG ACCORDING TO MANUFACTURERS SPECIFICATIONS (ACTIVATE 220 H1) ALL GEARBOXES ARE FILLED WITH FOOD GRADE OIL AT THE FACTORY.

• CHECK SOLENOID VALVES FOR TIGHTNESS, CLEANLINESS AND FUNCTION. SOLENOID VALVE ARE LUBRICATED WITH SLICONE GREASE

• CHCECK JOURNAL BEARING IN ROTARY FILTER. IT IS ORGINALLY 10MM THICK AND MUST BE REPLACED IF LESS THAT 6MM AT THE THINNEST PLACE. THE DISTANCE BETWEEN THE INTERNAL AND EXTERNAL RINGS AROUND THE JOURNAL BEARING MUST NOT BE LESS THAN 2MM. WHEN FITTING A NEW JOURNAL BEARING IT MUST BE "STRECHED" WHEN THE FILTER DRUM IS ROTATING. THERE MUST BE A SPACE OF 25MM BETWEEN THE BEARING ENDS SO THE JOURNAL BEARING CAN EXPAND.

PLEASE TAKE A PICTURE

PARTS AND PRODUCTS

• ACTIVATE 220 H1 WORKSHOP/FOOD GRADE CABINET

• 10 MM Bearing LOCATION L01010-2