Back
Manufacturing / Industrial • Inspections

5085 Preventive Maintenance

This procedure outlines preventive maintenance tasks required to keep the equipment running efficiently and safely. It includes inspection, lubrication, filter changes, calibration, and checks of electrical and mechanical components. Following this procedure helps reduce unplanned downtime, extend equipment life, and maintain consistent performance.
Vertiv Lincoln
08/19/2025

5085 Preventive Maintenance

This procedure outlines preventive maintenance tasks required to keep the equipment running efficiently and safely. It includes inspection, lubrication, filter changes, calibration, and checks of electrical and mechanical components. Following this procedure helps reduce unplanned downtime, extend equipment life, and maintain consistent performance.

    Check springback of the beam

    Lubricate threaded rod with oil. Shell 220

    Grease X-axis bearings. Mobilux EP2

    Grease R-axis bearings. Mobilux EP2

    Grease Z-axis bearings. Mobilux EP2

    Grease ball screw bearings

    Clean and lubricate racks for X and Z-axis. WD-40 and shell 220

    Clean and lubricate gauge finger brake plate. WD-40 and Shell 220

    Check springback belt tension

    • Pass
    • Flag
    • Fail

    Visually inspect hydraulic hoses for damage or leaks. Repair as needed or make follow up W.O.

    • Pass
    • Flag
    • Fail

    Visually inspect electrical wiring and applicable energy chains for any damage. Repair or make follow up W.O.

    • Pass
    • Flag
    • Fail

    Clean oil cooler

    Replace oil filter

    Replace compressed air filter and drain water if needed.

Source: Vertiv Lincoln (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.