Extol - Monthly Preventive Maintenance

Verify all E-stops are working properly

If no, perform lockout/tagout and contact automation/maintenance. Must be repaired before continuing.

• Yes
• No
• N / A

Check if all safety equipment is in working order

Includes switches, light curtains, etc.

• Yes
• No
• N / A

Look for any visual signs of damage to equipment

• Yes
• No
• N / A

Wear cotton gloves and clean the inside surface of the concentrators and reflectors

Restore the most reflective surface possible with a microfiber towel. Refer to laminated instructions in the program book Extol manual page 17.

• Yes
• No
• N / A

Clean frame, fixtures, and inside of cell

Use scrubbing bubbles and microfiber towels.

• Yes
• No
• N / A

Clean sensors using microfiber towels

• Yes
• No
• N / A

Clean fixture and cell

• Yes
• No
• N / A

Manually drain the filter/regulator unit of all debris and fluid

• Yes
• No
• N / A

Is corrective action needed?

If yes, write in comments below.

• Yes
• No
• N / A

Verify that there is a log sheet and equipment operation standard on the cell

• Yes
• No
• N / A

Does this PM need to be updated?

If yes, write in comments below.

• Yes
• No
• N / A

Comments

Parts used

Technician Name