Plant and Equipment Safety Internal Audit Checklist - ORORA-HS-FO-11-01-01
An internal safety audit checklist for all plant and equipment conducted in accordance with ORORA-HS-FO-11-01-01 to systematically assess safety compliance, identify hazards or non-conformances, and document findings, ensuring all corrective actions are assigned and tracked to maintain a safe and fully compliant facility environment.
Plant and Equipment Safety Internal Audit Checklist - ORORA-HS-FO-11-01-01
This procedure ensures that all plant and equipment within the facility are systematically evaluated through a structured internal safety audit in accordance with ORORA-HS-FO-11-01-01 standards, verifying compliance with applicable workplace health and safety regulations, identifying hazards or non-conformances, and generating documented findings that drive corrective actions and support a safe, compliant, and continuously improving operational environment.
Procedure Max Score: 60
PLANT AND EQUIPMENT SAFETY
Consultation names & titles:
Is it clear on site who has the responsibility to ensure new plant and equipment is designed and purchased according to Australian / New Zealand / OSHA Standards and relevant legislative requirements?
Have pre-purchase risk assessments been completed for all Plant and Equipment purchases?
Does the Plant/Equipment risk assessment reflect the operational and environmental hazards related to the plant and equipment and risk controls for the identified hazards commensurate with the assessed level of risk?
Have all relevant Plant Registrations been identified and registered in accordance with regulatory registration requirements (e.g. pressure vessels, hoists, etc), documented in a register and current?
Is it clear on site who has the responsibility for managing and ensuring effectiveness of safety critical devices?
Is there documented evidence to confirm inspections, testing and maintenance is occurring in accordance with the site maintenance schedule?
Is Plant / Equipment on site recorded on a Plant/Equipment Register? Has the register been updated to include changes?
Is Plant and Equipment guarded as per AS4024 / OSHA 1910.211-219 Standard(s)?
Are all guards in place and functioning as intended?
Is there evidence of guards being tampered with or removed?
Have secondary hazards been introduced due to guarding design?
Are emergency stop devices prominent, clearly and durably marked and immediately accessible to the operator?
Are operational control devices clearly and durably marked, in good condition and located to prevent unintentional activation?
Are warning devices operational and suitable for the work environment?
Is Plant /Equipment positioned in a manner that provides safe access / egress and does not pose risk of collision?
Is Plant/Equipment being operated on surfaces free from risk of rollover?
Are workers operating plant / equipment in accordance with procedures?
Is Plant/ Equipment in storage / not in use safely stored or barricaded?
The site has an effective Isolation Lock Out System that is enforced and regulatory monitored?
Is there a risk of injury due to: Plant/equipment contacting live electrical conductors? | Plant/equipment working in close proximity to electrical conductors? | Overload of electrical circuits? | Damaged or poorly maintained electrical leads and cables? | Water near electrical equipment? | Isolation procedures poorly implemented or not at all?
Is there documented evidence that Isolation Procedures are reviewed as part of any equipment or process modifications?
Have Safe Work Procedures been developed for plant / equipment where required?
Have operators and maintenance personnel received training required to operate plant and equipment safely?
Are manufacturers manual and operator instructions readily accessible?
Is there documented evidence of ongoing supervision and observation of work practices to ensure competency levels of plant operators?
Is operation of Plant / Equipment that requires a High Risk Work License being performed by a licensed operator?
Is there evidence of checklists being completed by the Project Manager during the stages of design, installation, commissioning and decommissioning process?
Are Safety features / warning devices for the Plant/Equipment maintained and tested at regular intervals?
Is the site conducting regular verification checks to confirm that the Plant & Equipment Procedure is being adhered to?
Are these checks documented with associated actions assigned and managed to closure?
Site Operations Manager Name
Site Operations Manager sign off
Click here to sign
Source: DFW Distribution - Orora Packaging (Community Member)
