Back
Manufacturing / Industrial • Inspections

Zeroing the Position Measuring Systems

(Zero position ALLROUNDER 375V) Zeroing the position measuring systems on the ALLROUNDER 375V involves resetting the machine’s reference points to re-establish accurate positioning of the injection unit and clamping system. This ensures precise operation following maintenance, power loss, or initialization.
Dynomax Inc.
04/28/2025

Zeroing the Position Measuring Systems

(Zero position ALLROUNDER 375V) Zeroing the position measuring systems on the ALLROUNDER 375V involves resetting the machine’s reference points to re-establish accurate positioning of the injection unit and clamping system. This ensures precise operation following maintenance, power loss, or initialization.

    The zero position is reached when the head screw protrudes up to its head into the through hole.

    • T_Step1.PNG

    The message "Zeroing rotary table is possible" appears.

    • T_Step2.PNG
    • T_Step3.PNG

    Note : Ensure the motor is switched off when zeroing the rotary table.

Source: Dynomax Inc. (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.