Amada Monthly Preventive Maintenance

Lubrication

• Lubricate the parts listed in the lubrication chart (see Lubrication). Inspect the oil levels in the drive gearboxes for the v-axis, the turret, and the auto-index device (optional) and replenish as required.

• Motor upper bracket (grease fitting’

• Motor lower bracket (grease fitting’

• Lower turret disk Bearings

• Upper Turret disk bearings

• Striker

• Y-axis bearings

• Y-axis Ball

• Sub-guide upper cam follower

• Sub-guide Lower cam follower

• Pulley bearings

• Clamp

• X-axis ball nut

• X-axis bearings

Flywheel Belts

• Inspect and provide the proper belt tension by means of the adjustment bolts on the press motor unit. The belt should be depressed about 9 mm (l/3”) in the middle of the span between the flywheel and the press motor when it is depressed with a force of 1.9 to 2.0 kg (4.2 to 4.4 lb). Also inspect the belts for wear,and cracks and change them as required

Replenish

• Automatic lubrication pump

• Air system lubricator