W&H Cast Line 7-9 – Maintenance – 15000 h (20 months)
Inspection and battery replacement of your equipment.
MALPACK
05/17/2023
W&H Cast Line 7-9 – Maintenance – 15000 h (20 months)
Inspection and battery replacement of your equipment.
Industrial PC Automation PC810: Replacing the battery
- Replace the battery (1) in the automation PC. Interval: 15,000 hours Use: 3V / 950 mAh battery The instructions in the sub-vendor documentation must be adhered to. - Open the battery compartment and remove the battery by pulling on the extraction strip. (1) Battery Reference: 8.1.2 Eltainer
Service PC Automation PC910: Replacing the battery
- Replace the battery (1) in the automation PC. Interval: 15,000 hours Use: 3V / 950 mAh battery The instructions in the sub-vendor documentation must be adhered to. - Open the battery compartment and remove the battery by pulling on the extraction strip. (1) Battery Reference: 8.1.2 Eltainer
8.1.3 X20 Controller: X20 controller
WARNING: Risk of injury from electrical current. *Only ever carry out maintenance works after the machine has been de-energized. Only skilled electricians are allowed to maintain the controller* KEEP IN MIND: The mounting location of the X20 controllers can be taken from the electrical circuit diagrams. Not all of the X20 controllers have a battery. Which of the X20 controllers have a battery can be taken from the sub-vendor documentation. To prevent data losses the battery should be replaced withou one minute. - Replace the battery (1) in all X20 controllers. Interval: 15,000 hours Use: 3V / 950 mA battery The instructions in the sub-vendor documentation must be adhered to. (1) Battery Reference: 8.1.3 X20 controller
X20 control: Replacing the battery
KEEP IN MIND: Please heed the manufacturer's instructions. The X20 control is integrated in control power box +E2x. - Replace the lithium battery (1). Interval: 15,000 hours Use: 3V / 950 mA lithium battery (1) Lithium battery Reference: 8.3.1 Extruder 70
Source: MALPACK (Community Member)