Mech Line Preventive Maintenance
The aim is to ensure the mechanical production line operates efficiently, safely, and without unplanned downtime by performing regular inspections, servicing, and adjustments. This maintenance routine focuses on detecting early signs of wear, misalignment, or malfunction in mechanical components such as motors, bearings, conveyors, and drive systems. Inspect all components on the Storti Mech line.
545 Port Arthur
09/19/2025
Mech Line Preventive Maintenance
The aim is to ensure the mechanical production line operates efficiently, safely, and without unplanned downtime by performing regular inspections, servicing, and adjustments. This maintenance routine focuses on detecting early signs of wear, misalignment, or malfunction in mechanical components such as motors, bearings, conveyors, and drive systems. Inspect all components on the Storti Mech line.
Mecanical Components
Inspect and repair mechanical components as needed
Chains
Inspect all drive chains and palletout feed chains for damage missing chain links repair and tighten as needed.
Bearings Sprockets and Belt
Inspect all Saw, sprocket, line bearings and roller bearings for damage and greas if needed. Inspect all sprockets for ware missing teeth and sprocket bearings. Inspect belt on 180 for rips tears and conection.
Guarding
Inspect all guarding for damaged missing hoses if applicable and missing harware.
Saws
Inspect saws blades and replace
Gearboxes and hydraulic Components
Inspect all gearboxes and hydraulic components
Gearboxes
Remove fill hole caps located on gearbox at the end of drive chain and inspect oil and oil level add if needed. Look for any damages missing hardware.
Hydraulic on Stacker
Remove plate on top of stacker inspect hydraulic cylinder and hoses for leaks and damages. Place pate back and fasten plate back on stacker. Inspect wall side hydraulic tank, gauges, fluided, and solenoid located on top of tank.
Phenumatic
Inspect phenumatic cylinders hoses and solenoids
Phenumatic solenoids
Phenumatic cylinders
Inspect all phenumatic cylinders for leaks damage and missing hardware.
Phenumatic Hoses
Inspect all Phenumatic hoses and fittings for damage and leaks this includes all nail hoses on outside of fence
Electrical and Electrical Cabinets
Inspect all electrical and electrical cabinets
Cable trays and boxes
Inspect all cable trays for damaged wires and insure all trays are coverd with cap. Make sure all junction boxes have lides on this includes start, stop, and E-stops on outside of mech line doors. Look for pulled out wires, bare wire, wire fittings missing, ect.
Limit Switches and orange pig tail indicators
Inspect all limit switches for damage, wore out limit sitch lever, or missing hardware. Inspect all orange indicators on each saws and sanders they are located on the phenumatic cylinders.
Motors
Inspect all motors for missing guards hardware and electrical covers.
Source: 545 Port Arthur (Community Member)